for Camera C70, Kit Tiltaing Cage Lightweight Black Canon

This Lightweight Kit provides protective armor for the Canon C70 and includes relevant accessories to improve the functionality of the C70 while remaining lightweight.The Full Cage features several 1/4"-20 threads with locating pins, dual cold shoe receivers, and a NATO Rail for Type IV and VI Side Handles.It also features an ARRI Compatible Rosette Connection as well as a Rod Attachment Port for our optional Single Rod Holders.The rosette is uniquely located on the bottom of the cage which allows for our Adjustable Top Handle to be mounted in order to more comfortably shoot vertically.An additional Security Attachment with an anti-slip cushion is located in the top left corner of the cage and creates an additional point of contact for added security.The Bottom Plate provides 1/4"-20 threads for attaching your camera to various quick release plates and is compatible with the ARCA Receiver of the RS2 Mounting Plate.The included EF Mount Lens Adapter Support mounts to front of the cage to provide an additional point of contact to support an RF to EF Adapter.The 15mm LWS Baseplate Type V adds 15mm rod support to the system and allows you to mount rod based accessories such as matte boxes and follow focus systems.The low profile of this baseplate was specifically designed to accommodate the unique height of the C70 and to perfectly align with the sensor's optical center.The bottom of the baseplate natively connects to our Tilta Standard Dovetails and also supports various quick release plates via 1/4"-20 and 3/8"-16 threads.Please note: the 15mm LWS Baseplate Type V features separated front and back rod mounts that are not connected.FeaturesHighly CompatibleMultiple built-in 1/4"-20 screw holes in all directions of the camera cage. Ready for mounting various accessories. The top plate has dual cold shoe mounts for mounting a top handle, monitor bracket, on-board microphone, etc.Multiple Holes For MountingMultiple 1/4"-20 screw holes and cold shoe mounts for mounting various accessories simultaneously.Top HandleThe dual cold shoe mounts on top of the camera cage are ready for mounting accessories such as a top handle, on-board microphone, additional light, etc.Security AttachmentThe additional security attachment with anti-slip cushion adds more security to the camera.Left Side ArmMultiple built-in 1/4"-20 screw holes and cold shoe mounts. Allows for the mounting of various accessories.Side HandleThe side arm has a built-in NATO slot & 1/4"-20 screw hole with locating point for connecting a side handle.Dual Holding GripsSupports run/stop control and lens control. Dual holding grips provide more support and longer operating time.Right Side ArmThe right side arm provides multiple 1/4"-20 screw holes with locating points, wrist strap holder, and shoulder strap holder.Rigid Custom DesignThe custom fitted camera cage for Canon C70 provides an ARRI compatible rosette for mounting various accessories, as well as reserved space for all of the connection ports.Flexible OperationQuickly rotate the adjustable top handle to set up for a vertical operating mode. Easily adjust for balance and steady operation.ARRI Compatible RosetteThe bottom of the camera cage has a built-in cold shoe mount, 1/4"-20 screw holes with locating points, and an ARRI compatible rosette. The ARCA quick release plate is directly compatible with the Tiltaing 15mm LWS baseplate and DJI RS2 gimbal.Lens Adapter SupportThe front of the camera cage has built-in screw holes for mounting a lens adapter support. Compatible with various lens adapters. Provides protection for the camera's lens mount. Support TypeCage Grip TypeNone Camera CompatibilityCanon EOS C70 Battery Plate TypeNone Accessory MountingCage: Multiple x 1/4"-20 Thread, Multiple x 3/8"-16 Thread Camera Mounting1/4"-20 Screw Tripod MountingQuick Release Plate: 1/4"-20 Thread Shoe MountingCage: 1x Cold Shoe RosettesCage, Base: 1x ARRI Rosette w/ M6 Thread Rail Mounting1x NATO Rail ConstructionAluminum, Steel Dimensions7.1 x 5.8 x 2.8" (179.5 x 146.5 x 71.5mm) Weight9.8 oz (278.5g) Support TypeBaseplate Grip TypeNone Camera CompatibilityCanon EOS C70, Universal Rod Standard15 mm LWS / 60 mm Spacing Battery Plate TypeNone Accessory MountingNone Tripod Mounting1/4"-20 Thread, 3/8"-16 Thread Rod PortsBaseplate, Front: 2x 15 mm Rod PortBaseplate, Rear: 2x 15 mm Rod Port Shoe MountingNone RosettesNone ConstructionAluminum, Steel Diameter15 mm Length7.87" (200mm) MaterialAluminum Thread TypeFemale / Female Number of Rods1